
TPO Roofing
Reflective welded sheet for big low-slope warehouse roofs with long open runs.
TPO roofing in NoblesvilleMcCordsville commercial roofing work centers on warehouses with long drain runs and dock canopies, where we tear off and install TPO, EPDM, and metal roofs.


McCordsville commercial roofing starts at the drains. Wide warehouse roofs move water a long way, so we check drain heights, sump depth, and the slope built into the insulation before choosing a system.
Tapered insulation and crickets steer water to each drain, and dock canopies get their own flashing and gutters so water stays off the loading doors.
Warehouse leaks often show up near racking or docks. These pairs connect the floor-level clue to the roof cause.
Puddles beside racking after rain point to water running along the deck from a drain set higher than the roof.
A drain that sits above the roof around it leaves a ring of standing water and stretches the membrane at the sump.
Water at the loading doors often starts at the canopy-to-wall joint or a canopy gutter that has pulled loose.
Flashing where a dock canopy meets the wall opens as the canopy moves, and water runs behind the wall panels.
Orange flutes over the aisles show long-term leaks soaking the insulation above them.
Broad ponds in the middle of long runs mean the roof needs crickets or tapered insulation to move water.
Floor puddles under a warehouse skylight usually start at the curb flashing or a cracked lens frame on the roof above.
Low skylight curbs on wide roofs sit in the path of moving water, and their flashing corners open as the curb shifts.
Warehouse roofs are big, so the repair-or-replace call carries weight. Core cuts across the bays settle it.
| Roof Factor | Repair And Keep | Replace The Roof |
|---|---|---|
| Drainage | Water reaches drains with a few crickets added | Ponds across many bays |
| Insulation | Dry across most bays | Wet board in large areas |
| Deck | Firm, with light surface rust | Rusted flutes under wet areas |
| Dock Canopies | Flashing joints resealed | Canopy roofs failing along with the main roof |
| Operations | Short work windows by bay | Phased tear-off planned around shipping |
Warehouses here take one of four systems, matched to slope and structure.

Reflective welded sheet for big low-slope warehouse roofs with long open runs.
TPO roofing in Noblesville
Rubber sheet in wide rolls that cuts the number of seams on large roofs.
EPDM roofing in Noblesville
Roofs over processing and production space, phased around shipping.
Industrial roofing in Noblesville
Panels for sloped steel-framed warehouses and storage buildings.
Commercial metal roofing in NoblesvilleSend the address and where water shows up on the floor. We map the drains, core the bays, and price the roof section by section.
Get A Free EstimateShipping keeps moving during the job. These steps show how the roof work stays out of the way of trucks and forklifts.
We mark every drain, skylight, and unit, measure the ponding, and cut cores in each bay.
Slope and structure decide between membrane over tapered insulation and metal panels.
Hoists and dumpsters go where trucks and forklifts can still reach every dock door.
Each bay comes off, gets tapered insulation and new membrane, and is sealed before the shift ends.
Dock canopies get flashed and guttered last, then we walk the roof with your facility lead.
Besides McCordsville, these towns are on our regular list. For a building somewhere else, call us or send us a message.
Occupied offices and retail centers. Work runs around tenant hours.
Commercial roofing in FishersPick a question to read the answer. Warehouse and retail owners in McCordsville ask these most.
Slope and structure decide it. Low-slope warehouses usually get TPO or EPDM over tapered insulation that carries water to the drains, and sloped steel-framed warehouses often suit metal panels. Before recommending one, we look at rooftop units, skylights, and the loading dock canopies.
Yes. Retail, office, shop, and warehouse buildings in McCordsville get TPO and EPDM installs, industrial roofing, and commercial metal roofing. Every job begins with an inspection of the old roof, insulation, and deck, so the new system fits the building and how it drains.
A full job covers tear-off, deck repair, tapered insulation, membrane or panels, flashings at curbs and walls, new drains or strainers, and edge metal. On warehouses we add canopy work at the docks, and on retail buildings we plan around store hours.
Smaller retail roofs in McCordsville are part of our regular work. Send the address, and we set a roof walk, core the roof, and price a system sized to the building, with roof days planned around your store hours.
Pick one that cores the roof before pricing, writes out insulation, drain, and flashing details, and explains how the work stays out of the way of shipping or customers. We do each of those and leave the written scope with you to compare against other bids.
Skylights get checked with the rest of the roof. Curbs that sit too low for the new insulation are raised, cracked lenses are flagged for replacement, and every curb gets new flashing tied into the membrane. Fall protection screens go on any skylight that lacks one.

Send the warehouse or retail address. We map the drains, core the bays, and write a scope that keeps your docks and doors open.